Questions & Answers for: kg lbs ft

...kg-m, 22 ft. lbs.) in alphabetical sequence. Then tighten all bolts to 69 Nm (7.0 kg-m, 51 ft. lbs.) in alphabetical sequence. Back off all bolts by 180° first; back them off by 180° again. ...

kg-m) (E): 28 - 38 ft. lbs. (38 - 51 Nm, 3.8 - 5.3 kg-m) 4. install front exhaust pipe. Tightening torque: (A): 29.7 - 40.5 ft. lbs. (40.2 - 54.9 Nm, 4.1 - 5.6 kg-m) (B): 51 - 69 ft. lbs. (69 - 94 Nm,

...lbs. (10 kg) of pressure exerted when installing a used belt. On a new belt the belt deflection should be 0.20-0.27 inch (5-7mm) with 22 lbs. (10 kg) of pressure exerted. Alternator electrical ...

...lbs. (49 Nm, 5 kg-m) Loosen bolts in reverse of order shown. Retighten cylinder head bolts in order shown. Tightening torque: 18 ft. lbs. (25 Nm, 2.5 kg-m) Mark cylinder head bolts for rotational ...

...65°) (M12) 35 Nm (350 kg.cm; 26 lb.ft) + (60°to 65°) + (60°to 65°) Camshaft: Using two or three steps, tighten the bearing caps to 12-14 Nm (120-140 kg.cm, 9-10 ft.

...lbs. (50-60 kg). Run the engine for 10 minutes, then readjust the tension to 110-132 lbs. (50-60 kg). Used belt: 95-110 lbs. (43-50 kg). Tighten the power steering pump bolt to 27-38 ft. lbs. (37-52 ...

...lbs of torch do you use for rear tire bit confused. Do you want the psi of the tyre or the torque of the rear wheel axle. Tyre should be about 21psi Rear Axle Nut: 98 N-m (10 kg-m, 72 ft-lb) Rear ...

kg to lbs calculator 156.2 cm 78kg pleases convert these into height & weight 156.2 cm is 5 feet and 0.6 inches or about 5 ft 1 in 78 kg is 171.96 lb or about 172 lb Here is the link to an online ...

...kg-m, 0 ft. lbs.) (loosen) Step 4: 27.4 - 31.4 Nm (2.8 - 3.2 kg-m, 21 - 23 ft. lbs.) Step 5: 50° - 55° (target: 50°) clockwise To confirm it is a head gasket, do a compression and/or leak down test. ...

...newton meters or ft/lbs. One is imperial and the other is metric Place a rock on a scale and weigh it in lbs of kg it is the same weight Torque specifications for cylinder head Suzuki 2006 XL7 ...