...keyboard. Hope u can help. I had the same problem. Do not put the battery back. It is damaged. You need a replacement. It is a battery surge that causes this behavior. Removing the battery helped; on ...
...or your nails) to get access to those screws, and then when you're done put the pads back in place (they are sticky on the inside, so I guess they'll glue back to the keyboard and not
Question about TravelMate 240 Notebook
keyboard was cleaned and blown but on fixing it back it has not worked at all. I've fixed a USB and it has worked but the touchpad is not working. do i buy a new keyboard ? Is the touch pad spoilt/ My
Question about Aspire 5610-4648 Notebook
...keyboard is a key marked FN. Hold down the FN key and press the F9 key. That will turn the mouse pad back on. BTDT, HTH i think it is cause of touch pad sofwere damage. re instal once a time it. and ...
...back-lit keyboard? This was an option for some models. hi -try updating the system BIOS of the computer -visit support.dell.com -click on drivers and downloads -click or choose by service tag ...
Question about Wireless Access Duo Optical Desktop Keyboard/Mouse KBWIREOPT
I obviously hit something on my keyboard and now the number pad doesn't function as a number pad but rather as the arrows. How do I get the number pad back? It's usually a key called NUM LOCK.
...back. How do i re-gain controll of my touch pad? It shows that you have accidentally shut off the touch pad. In the upper left corner of the touch pad is a dimple/circular depression. Tap it twice, ...
...back to slot and other screwdriver lift up the keyboard pad. Just lift up alitle bit. Then do the same with other locks. When you've done all of surround lock, lift up your keyboard pad very ...
...keyboard to is an I pad. Follow the I pad's normal Bluetooth pairing procedure. Around the same time, slide the switch on the back of the ip2101 from OFF to ON and then press the black button to the ...
...keyboard. Some of the notes dead. I screw off the keys and wash the rubber pads with water and clean the contacts on the PCboard,i put back the rubber pads,and i push the pads with my finger,all the ...
Usually answered in minutes!
19,138 Questions
12,216 Questions
7,310 Questions
7,277 Questions
5,472 Questions