Questions & Answers for: Toyota 4Runner will any key work

...lock with remote or inside switch, but they will unlock with eather device, manual locking with key works ok, Checked all fuses, they are good, no other apparent electrical problems. Changed ...

Ad

work. turn key toacc using pick release ign cyl start car w long pliers while having locksmith repair cyl can't get key to acc Since it wont turn with any of the keys it sounds like the locks cylinder

Ad

IN PLACE WITH TWO PHILLIPS SCREWS, TAKE THE SCREWS OUT AND LET THE SOLENOID HANG LOOSE AND YOUR PROBLEM IS FIXED, IF THE SOLENOID DOESN'T WORK IT WON'T PULL THE PIN DOWN AND KEEPS THE KEY FROM TURNING

Key won't turn in ignition, 2001 Toyota 4Runner I have a 2001 Toyota 4Runner. This morning, when I put the key in the ignition, it will not turn past the ACC notch - or maybe to the ON position. I've ...

Question about 1993 4Runner

3 Answers

...key to start, hear the click and then nothing ... about 5 times now. Check the tremianls on the battery. also follow your ground cable to where it is attached to the frame, motor or body. if the ...

ignition key will not work in ignition ignition key will not work Get a key cut from the VIN. I find my keys go dull in a couple of years and a fresh VIN cut key works great.

Question about 2002 4Runner

1 Answer

...key and still doesn't work. The actual ignition switch, the electrical switch which the key cylinder turns, is probably bad. It is made of plastic and does eventually wear out. Have that part checked ...

key to on and resetting the trip miles but it did not work. You were close with re-setting the trip miles. Here are the steps: (1) Turn key on, but do not start car. Keep pushing the trip miles button

1992 toyota 4runner ignition is locked cannot turn the key This is the first time this has happened. The ignition wont turn when I attempt with proper key. The steering wheel is locked, but he key ...

Question about 1996 4Runner

1 Answer

...key didn't work there would be no fee and then they would look at the ignition. Key didn't work, quoted $425. parts and labor for a new ignition cylinder. When I last tried my key the red light that ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

Manuals & User Guides

Loading...