Questions & Answers for: key cycle

...cycle = 1 lock and 1 unlock.) B. Insert the key in the ignition cylinder. C. Turn the ignition to ON (Do NOT Start) then back to OFF. D. Turn the ignition to ON (Do NOT Start) then back to OFF. E. ...

Ad

Question about Neptune FAV6800AW Top Load Washer

1 Answer

...Cycle key making constant contact forcing the Key/LED to cycle thru the Spin Cycle settings. Under normal conditions if you press and hold the Spin Select key it will cycle thru the settings, yours ...

Ad

Key in your new code, then the door locks should cycle to indicate the code has been saved. Insert the key into the ignition and turn the key to RUN position,within 10 seconds turn the key between the

...KEY CYCLE if the pump 'energizes' for a short burst, it maybe going through a norml proming cycle before the key is moved to the start position, need more info, i.e. how long before 'every key

Question about 2003 Silverado 2500HD

1 Answer

...button and push lock and unlock button on remote at same time for 15 seconds (holding down) locks should cycle to signal remote learned repaet for each remote when done cycle key to exit program ...

Question about 2001 Land Cruiser

1 Answer

cycle per second. (1Cycle = 1 lock and 1 unlock). B. Insert the key in the ignition cylinder. C. Turn the ignition to ON (Do NOT Start) then back to OFF. D. Remove the key from the ignition. 5. Within

Question about 2008 Land Cruiser

1 Answer

cycle per second. (1Cycle = 1 lock and 1 unlock). B. Insert the key in the ignition cylinder. C. Turn the ignition to ON (Do NOT Start) then back to OFF. D. Remove the key from the ignition. 5. Within

Question about 1988 LS 650 Savage

1 Answer

no ignition key have 88 savage with no ignition key 1988 Suzuki Savage LS650 Ignition Switches ' J&P Cycles www.jpcycles.com/1988-suzuki-savage-ls650/ignition-switches 7 products - Find 1988 ...

...CYCLE the key OFF then ON and wait 10 seconds. REPEAT the self-test. If DTC U1900 is still present, REFER to Section 418-00 . U1900 CAN Communication Bus Fault-Receive Error Occupant Classification ...

...Cycle key to OFF and wait at LEAST 10 seconds, after the 10 seconds, repeat the procedure for a total of 3 key cycles and the vehicle should start on the 4th key Cycle, if the key is good. If it's ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

Top Cars & Trucks Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

john h

Level 3 Expert

29494 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

7339 Answers

Are you a Cars & Trucks Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...