...kettle is put on the base. If this is not pushed in far enough it will have problems. The cause is that after some use the connector in the base plate collapses into the base by 1-2 mm This means the ...
Where can I find them? Okay. I took the base off the kettle (made a special screwdriver). Saw that one of the contacts was loose on its 'swage'. Used a pin punch to re-swage it. Bingo! it worked. Jeff
Question about SK500XL Stainless Steel Cordless Electric Kettle
...base to the kettle. We have a pin lead in the middle which is solid and doesn't move, and to two other leads which are flexible which with the time they bend and when you hook the kettle to the base ...
Question about SK500XL Stainless Steel Cordless Electric Kettle
base of the kettle and then some to the base that plugs into wall. Walla! The kettle is now working. I pray it continues. And, from now on I'm unplugging base after each use :) I had the same problem.
Question about HD4651 Electric Kettle
...the base or kettle connector must be replaced. You will need the proper tools and wire connectors to be able to replace these parts. Technically speaking... These are not worth servicing. Jerry
Question about RK-17 Cordless Electric Kettle
...kettle by cuisinart. i HAVE THE BASE IT WORKED FINE, MY DAUGHTER COOKED THE KETTLE WHEN SHE TRIED TO HEAT IT ON THE ELEMENT, now I need to find a new kettle! [email protected] I have the RK-17 model, ...
...Found the white trip switch, which was a white line in the socket which connects the kettle to the charging base. Pressed it with a screwdriver and it came out more. Tested the kettle, works! ...
Question about "Ikon" Tea Kettle Electric Kettle
...base and kettle of my Breville Ikon? The electrical connection between the base and kettle of my Breville Ikon is very poor - I must rotate the kettle on the base very carefully in order to achieve a ...
Question about Brushed Stainless Steel Jug Kettle with Charcoal Handle, 1.8L
...base to the kettle is not connecting. if I hold the kettle firmly down it will start but as soon as I take weight off the kettle it stops. The contacts inside the base are carboned up and possibly ...
Question about Brushed Stainless Steel Jug Kettle with Charcoal Handle, 1.8L
...can be screwed a bit tighter. https://www.google.com/search?q=KETTLE+MOD+18941 Manual RUSSELL HOBBS 18941 and regarding kettle leaks https://www.google.com/search?q=KETTLE+MOD+18941+leak+at+base
Usually answered in minutes!
378 Questions
257 Questions
252 Questions
238 Questions
190 Questions