Questions & Answers for: kenwood faceplate coming

...This has been an issue with some of the older Kenwood HUs that have the MASK motorized faceplate. The flex-cable gets bent and pinched enough over the years that it eventually cracks the

faceplate not working fuses are good, have power to unit, faceplate will not operate. worked fine last nite, nothing today. any suggestions? is any sound coming out to the speakers

kenwood kvt-717 problem i need a brain for the system do you know where i would be able to fix one What happened? It didn't come with one? LOL Your BEST bet is to check on ebay, or call Kenwood and ...

...faceplate or eject cd on kenwood i am unable to remove the faceplate or eject cd on a kenwood KDC-516S CD Player that came with a car i purchased. it did not come with the remote or instruction ...

There is no display on the faceplate. The faceplate is stuck in the CD eject position. If I remove the faceplate the mechanism rotates to the position where the controls would be visible but when I ...

Just installed but will not turn on. A friend gave this unit to me. I just wired it up, but it won't turn on. I tried the following: --> voltage is correct at 12.7V -->fuse is ...

...faceplate to the inside of the unit) may be defective - this is common in some Kenwood units. Try searching Google or youtube for ribbon cable repairs etc. Hope this leads you in the right direction. ...

DDX7019 faceplate will come down but will not go back up when i push the eject button everything eles works just fine , just can't get the faceplate to motorize backup. please help It will need a new ...

kenwood kdc-x396 aftermarket car stereo that I am trying to install in my 2000 Jeep Grand Cherokee. I have the harness plugged in and everything, and I have power to my faceplate. I can switch between

...Kenwood kdc mp 4032 The faceplate was soak with water and already replaced with new one but still No power and the fuse is ok I would use a test light or multimeter and see if you have system voltage ...