Question about 22422 Top Load Washer
...Kenmore Washer machine that get frozen inside , so I need to open it to warm it up. Thanks Fabio JUST LIFT THE COVER UP AND USED ONE HEATER TU WARM IT UP HOWEVER THE HOT WATER DOSE NON STOP INTAKEN ...
...washer. On that setting the water fills the tub with only "hot" water however the warm/warm water temp works and cold/cold water temp works. Most of my loads I want to use a warm/cold setting but ...
Question about 22422 Top Load Washer
Kenmore machine. Cold water dribble in rinse cycle, hot and warm are fine If you check the warm water flow you'll likely find it is HOT...and not warm. Check the faucet end of hose to see if screen is
...Kenmore top loading washer: http://www.fixya.com/support/r3575881-replacing_water_inlet_valve_on_whirlpool Replacement parts can be purchased at any of the following web sites: searspartsdirect.com ...
Question about Elite Oasis 27052 Top Load Washer
Kenmore 300 washing machine warm water cycle is hot water when i set the kenmore 300 washing machine on the warm cycle the water seems to be very hot You have to check the thermostat connected to ...
...washer is on warm warm, hot warm anything but cold. Otherwise I get NO water. It will spin. But I can only get hot water. Not even warm water. One of two things, easy one first, the cold water inlet ...
...Kenmore Series 80 Super Capacity Plus Washer. It has 3 water temperature settings, Cold/Cold, Warm/Cold, and Hot/Cold. Warm is Cold and Hot is barely warm. I know I have very hot water as the supply ...
...Kenmore washer. Anytime the selection is on cold, warm and cold, hot and cold the washer makes squicky noise and very little water come out even though both hot and cold water are open. the only time ...
...Kenmore washer model 110.2206 and im having a problem with the cold water. When the water temperature switch is set to the cold/cold position the washer does not fill with cold water. When the water ...
Question about 24032\24036 Top Load Washer
...Kenmore washer model 110.98762792 and im having a problem with the cold water. When the water temperature switch is set to the cold/cold position the washer does not fill with cold water. W I have a ...
Usually answered in minutes!
9,125 Questions
3,839 Questions
3,158 Questions
2,979 Questions
2,660 Questions