kenmore washer makes a gravely sound...will not agitate nor will it spin out. Replaced motor coupling last year...gear mechanism of some kind??? If the lid switch is bad it will not drain or spin. Try
Kenmore 80 series washer model #11092587210 I bought this washer used and the first time I tried to wash clothes it filled with water then agitated only a few minutes. It will stop on its own and ...
...washer My 6 year old Kenmore elite top loader's wash plate doesn't seem to go through its proper motions. When the lid is closed and the washer has filled and the agitating cycle begins, you can hear ...
...clicking, like there are many parts that are loose. That is what it sounds like to me. There is also excessive vibration and niose during the spins cycles. possibly a coin or hair clip in the pump if ...
Question about 3.8 cu. ft. HE3t Front Load Washer
...washer seems to have a problem draining and I do hear a funny sound. I have checked the hose and it is clear and fine. ?F02? is a Long Drain error. If the drain time exceeds 8 minutes this error code ...
Question about 3.8 cu. ft. HE3t Front Load Washer
...kenmore washer makes a rapid clicking sound during the spin cycle. replaced the coupler but it didn't fix my problem. clicking starts at the end of the rinse cycle when the washer starts to drain ...
Question about 3.8 cu. ft. HE3t Front Load Washer
...Kenmore washers use a Lid Switch as a safety device. Unless the switch senses that the lid on the washer is closed, the washer will neither agitate nor spin. Older models only used the switch during ...
Question about WM2277H Front Load Washer
...Kenmore, Samsung or Whirlpool Front Load Washer that is draining and then repeats drain cycle several times before throwing an OE error, by all means take the time to clean everything including the ...
Question about WM2277H Front Load Washer
Kenmore Washer Everything seems to work except won't spin during rinse cycle and agitator won't churn. Hi Please check the wiring to the lid switch and make sure that the there is no oil spills on the
...washer does not drain. Instead, there is a clicking sound when the machine is turned on in the Spin/Rinse cycle. It still has lots of water in it because the water will not drain. The lid locks when ...
Usually answered in minutes!
9,125 Questions
3,839 Questions
3,158 Questions
2,979 Questions
2,660 Questions