Questions & Answers for: kenmore washer clean coin trap

Question about Washing Machines

2 Answers

...kenmore HE2? My washer sounds like there are rocks in it only when the drain pump is moving (not when washing or spinning only). thanks, PJ Yes, it will. There are two screws holding the bottom panel ...

Ad

Question about Duet GHW9150P Front Load Washer

1 Answer

...Kenmore machine washes but does not advance to the rinse or spin cycles. You have a clogged coin trap. Easy to fix. Just take the bottom pannel off and the trap will be right before your eyes. Clean ...

Ad

Question about Duet GHW9150P Front Load Washer

1 Answer

...kenmore he2t front load washer error code F21 F21 is a long drain...it is taking too long to drain..you have a something slowing down the drain.. you can remove the bottom panel and clean out coin ...

Question about 44102 Front Load Washer

1 Answer

...a f-code. this unit will not spin if it can not drain water for tub/ things to check are you are using HE soap and then clean coin trap in pump by removing front lower panel. the trap is right in ...

Question about 3.8 cu. ft. HE3 Front Load Washer

1 Answer

...washer? I would like to clean the drain screen, but wanted to know how complicated it is getting to it and ease of cleaning it and replacing it. Thanks if you talking about the drain trap, its very ...

Question about Elite 45986 Front Load Washer

2 Answers

...Kenmore front loader washer? There is no lint trap. There is a coin catcher on the pump. The design of the wash action on a front loader is such there is less lint than on standard machines. One of ...

Question about Elite 45986 Front Load Washer

1 Answer

...Kenmore Elite washing machine, and while washing a load of laundry, the washing machine stopped. So you have water in the bottom at the end of a cycle. Clean out you drain pump's coin trap, and stop ...

Question about HE2 Plus Front Load Washer

1 Answer

...kenmore 417-43042200 remove the lower toe kick panel below the door and remove the clean out trap,its a 2 to 3 inch round plug and it unscrews and it is probably full of debris ...

...washer. Is there something special I need to do? Even a blonde can do it! Quick fix/repair for Kenmore He2 ... ? 4:57 https://www.youtube.com/watch?v=4o9hWHQkOMM Sep 1, 2013 - Uploaded by And Justice ...

Question about HE2 Plus Front Load Washer

1 Answer

...Kenmore or Maytag/Whirlpool washer, you have a drain fault, To fix, you need to remove the lower panel on the front of the machine. Unplug the washer, pull away from the wall and tilt it backwards to ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Top Washing Machines Experts

Brad Brown

Level 3 Expert

19187 Answers

Cindy Wells

Level 3 Expert

6688 Answers

john h

Level 3 Expert

29494 Answers

Are you a Washing Machines Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...