kenmore 80 series and the inside tub is unlevel how do i level it if you could post the model number found just inside the lid, I will be able to provide a more precise description of what you need to
kenmore washer kenmore 80 series top load, replaced lid switch, and now I can't get the washer to balance, already tried leveling the machine how old is it reply will help
Kenmore Series 80 Washer: Water fill seems low When running the washer, the fill levels appear to be low. Is there a recommended fill level that should be reached (inches)? At the "small load" setting
excessive vibration in spin cycle Kenmore 80 Series Washer Top Load Vibration Be sure the washer is on a solid surface, no plywood or skid platforms. Then be sure to lock in the front levelling legs.
Question about 24032\24036 Top Load Washer
...Kenmore 80 series washer that overflowes I had the same problem with a 90 series and there is a small hose connected to the water level knob that had slipped off. I have seen both bad water level ...
kenmore 80 series washer will not stop filling up one of three things,inlet water valve bad,water level hose came loose or water level switch is bad,check all tree and let me know-mike
Question about 24032\24036 Top Load Washer
Kenmore 80 series washer. Agitates immediately and does not fill I have a Kenmore 80 series washer. When I start the washer on any cycle with the lid open, it used to start filling with water and then
Question about 24032\24036 Top Load Washer
...Kenmore washer 80 Water not cutting off at full level and leaking from underneath Kenmore series 80 heavy duty washer The water lever sensor/switch is not working and needs to be replaced. IT has a ...
Question about 24032\24036 Top Load Washer
...Kenmore 80 Series Hvy Dty Washer? How do I check and replace the "water level sensor" on my Kenmore 80 Series Hvy Dty Washer? Water will not shut off on while filling the drum on any water level ...
Question about series 80 Washer Motor 3363737-
...kenmore 80 washer wont stop filling water level where is the reset button non my kenmore 80 washer? it wont stop filling with water If this is a top loader then the vacuum line has come off of the ...
Usually answered in minutes!
9,125 Questions
3,839 Questions
3,158 Questions
2,979 Questions
2,660 Questions