Questions & Answers for: Shure keeps dropping signal

Question about SLX24/58 Wireless Microphone System with SM58 Cartridge Microphone

2 Answers

sm 58 dropped and cuts out We are using a wireless sm58 mic and it was dropped. It will work but I have made it fail a couple times. Under which circumstances did it fail? Might be due to internal ...

Ad

Question about SLX UHF Headset Wireless System Microphone

1 Answer

dropping it would be caused by a short in the wire between the headset and the pack. The units are designed to be stacked on top of each other, but if the range from the mixer unit to the stage is too

Ad

Question about SLX24/58 Wireless Microphone System with SM58 Cartridge Microphone

1 Answer

...keeps dropping Thought it was the batteries, changed it but still keeps dropping signals. i just want know what will be the cost for shure SLX 2 series cost what is the procesure for payment how to ...

Question about Beta 87A Professional Microphone

1 Answer

I have a Shure Beta 87a very weak output signal I have a Shure Beta 87a that puts out a very weak signal compared to my other 87a's. I've cross tested to be sure that neither cable nor amp are the ...

Question about Beta 87A Professional Microphone

1 Answer

I have a shure v-15-5mr phono cartridge with a loose pin on the rear of the body. This is causing the right channel to cut out intermittently. How are the wires connected to the pins and can it be ...

Question about (PGX2SM58H6) Professional Microphone

3 Answers

...signal is dropping to the receiver.  Make sure there is nothing obstructing the receiver and transmitter and yo are not out of range of the receiver.Make sure you are using fresh, good quality ...

Question about ULX1 Body-Pack Transmitter Microphone

1 Answer

shure ulx1 signal dropout works fine when close to the receiver, but intermittently drops connection at a distance. I have 3 other ulx1's and 12 ulx2's and none of them have any ...

we have a Shure slx4 wireless mike it cuts out during our service. The signal just drops when this happen the anttena switchs from a to b then signal is lost it comes back on then goes off This ...

Question about PSM 200 Wireless Inear Personal Monitor System

1 Answer

signal drops completely in PSM 200 I own a PSM 200 Transmixer with P2R-H2 receiver pack. I experience COMPLETE loss of signal in my receiver within 1-3 minutes. I bought a new (used) P2R-H2 thinking ...

The SMG8 is synced but will not keep signal if the mic is not right next to receiver (PGX4) There are many reasons this could be happening. Call Shure Tech Support at 847-600-8440. They can help you ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Top Shure Audio Player and Recorder Experts

Brad Brown

Level 3 Expert

19187 Answers

 Grubhead
Grubhead

Level 3 Expert

5755 Answers

Mike Cairns
Mike Cairns

Level 3 Expert

3054 Answers

Are you a Shure Audio Player and Recorder Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...