Questions & Answers for: keep high beams low

high beam works double check the bulb. swap the two bulbs if it's only one side of low beams are out (to see if it's the bulb). also take a look at the wiring itself, including where the bulb plugs in

...High beams are dimmer and/or lower (physically) than low beams. what could be the cause? A loose ground wire to the headlight will keep it dim,Or a headlight adjustment will bring the headlight up.If ...

...keep them on for you. Once you pull back the lever you should hear a faint click. That will lock the high beams on. Pull it again and the same click will be heard and that releases the high beams to ...

...high beam on the other side. I keep replacing the bulb and the low beam keeps burning out on the one side only. WTH My care is a Honda Odyssey INFO: Your alternator may be pushing to high of voltage. ...

...high beam. I have to jiggle the hi-lo beam stick to keep them on lo.-2004 alero my low beams won't always stay on low at night!they want to go to high beam. I have to jiggle the hi-lo beam ...

...keep flashing to high beam instead of staying on low beam setting....very frustrating as it goes on it's own to high beam, even though it had been set to low beam....and people keep thinking ...

...high beams do this keeps happening and they say it blew a fuse do high beams and low beams run off a different fuse and would'nt a dead short be causeing this this has happend several times and ...

keep the high beams on. Could the headlight relay need replaced? Already replaced the low beam bulbs, not the issue. High beam switch clicks but doesn't stay on unless being held. Sounds like it's

...switch pulled back in the high beam setting and have to keep it pulled back in the high beam setting the entire time im driving Replace any blown fuses, and check or replace the head light

Low beams. Dont work ;high beams do high and low beam in same bulb What make , model an year vehicle ? New bulbs..n keep off during daylite