Questions & Answers for: Ninja 500 R kawasaki vulcan 750 forum

Question about kawasaki Ninja 500 R Motorcycles

1 Answer

battery is charged but starter wirs and rpm meter moves up but engine does not turn over. Most starters have a bendix that engages the starter to the flywheel to turn the motor.If the bendix part of ...

Ad

Question about kawasaki Ninja 500 R Motorcycles

1 Answer

I have a 1985 kawaski vulcan 700 runs and drives great but when the engine heats up the bike won't start for about 5 to 10 min. untill bike cools down like carbs are vapor locking can you recomend

Ad

Question about kawasaki Ninja 500 R Motorcycles

1 Answer

2004 kawasaki kfx 700 over heating, removed thermostat, removed air bubbles, flushed radiator. still over heating need some help solving this problem. have you verified that water is flowing? it has a

Question about kawasaki Ninja 500 R Motorcycles

1 Answer

stator tested grounded. needs to be replaced. how does the motor come out to replace the stator Dont know what model you have but most stators are behind the left hand engine cover, either screwed to ...

making noise like a grinding when taking off when it's cold http://www.youtube.com/watch?v=CTWI7X9sRWo

Question about 2005 Vulcan 750

1 Answer

2001 750 valcun when letting clutch out while in first gear shuts down like kill switch wont go nowhere and shuts down engine still all lights on so has electical power . sounds like you're right.

Question about 2005 Vulcan 750

1 Answer

my 1993 kaswaski 750 motorcycle want start and i tried to jump start it check the battery with a volt meter and make sure it reads at the correct voltage. If it doesn't the replace it. If the ...

my brakes don't have good stopping power on my motorcycle lack of stopping power use large rotor/disc

...air pressure for a 2005 vulcan 750? what's the rear suspension air pressure for a 2005 vulcan 750? i would use the 2004 because there is not much differance between the 04 and 05 ...

Kawasaki kr 150 2stroke has fuel in crankcase and also coming out the exhaust Re-set float height, or replaced float valve as it seems that fuel is seeping in when the engine is off, this needs to be ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Manuals & User Guides

Loading...