Questions & Answers for: KE 125 kawasaki no spark

...kawasaki cleaned and rebuilt carb its getting spark new gas and tank starts after 10 to fifteen pulls then back fires through carb and stalls 150# compression in both cylinders check the timing it ...

Ad

kawasaki 200 Pull the spark plug. If the porcelain cone is whitish then change the main jet to a higher number i.e.. 178 original main jet changes to a 180 or a 182 if needed. If the porcelain cone is

Ad

...Kawasaki KE 1976 all the indicator wiring pluss lights have been stripped off the bike pluss?? whats the other spark plug in the head for ? A service manual is a very valuable tool, esp. with a bike ...

...Kawasaki KE 125 want spark, but has spark going to the coil, so how to tell if the coil is bad? you can trace if a coil is bad by using multi tester and check the voltage coming from it.,the volts ...

...Kawasaki KE100 1978 with no spark, and a new magneto that shocks me and a new spark plug but still no spark You may have spark, but it may be firing at the wrong timing... be sure to check engine ...

Question about 1976 KE 125

2 Answers

...spark. my bike is a kawasaki ke125 2-stroke. it turnes over but doesnt get any spark. i dont know were to start to look. check the points for corrosion Is your ignition switch ok? Some pattern ones ...

Question about 1976 KE 125

2 Answers

kawasaki 1993 ke100 can't get spark and wires are all messed up where could i find a wiring diagram? Alldata.com :) Check http://www.thejunkmanadv.com/repair-and-service-manuals.html I just downloaded

Question about 1976 KE 125

1 Answer

loss compresion 1. check piston rings 2. check valve seal 3. check spark plug tight 4.check head bolts 5. check gaskets do all these one by one and check the compression.

Question about 1978 KE 125

1 Answer

...kawasaki ke 125 .. How do i disconnect the oil pump/injection system if its a two cylinder? and im wondering when i got the bike it has two spots for spark plugs but theres a bolt in one side and a ...

Question about 1978 KE 125

1 Answer

burned spark plug burning to hot, change air filter. adjust mix on carb, tight in and 1 and 3/4 out

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

Manuals & User Guides

Loading...