Questions & Answers for: JL 125 MARAUDER kawasaki how to

Question about kawasaki JL 125 MARAUDER Motorcycles

1 Answer

...showing how the shift drum rotates to move the forks left and right to change gears. Check with a Kawasaki shop to confirm my diagnosis. Please rate my

Ad

Question about kawasaki JL 125 MARAUDER Motorcycles

1 Answer

New 2008 Kawasaki Ninja 250 R with hesitation and/or stall given gas. Using the manual choke helps a little but the engine still stalls. Please help. If old gas sat in the carb.s for more than a month

Ad

Question about kawasaki JL 125 MARAUDER Motorcycles

1 Answer

Went out to ride it and the egine was boggy but cleared up after feathering throttle then eventually wouldn't run or start. I replaced the spark plugs, got fresh fuel, charged the battery, and ...

Question about kawasaki JL 125 MARAUDER Motorcycles

1 Answer

Trying to find a free pdf file of the 2010 Ninja 250 owner's manual the U.S. model with carburators. You may be able to get all your questions answered at Ninjette.org. It is a free website ...

Question about kawasaki JL 125 MARAUDER Motorcycles

1 Answer

bike wont even turn on when i put the key in and turn my bike to the on position. (like the battery is disconnected), but its not. and I had checked the fuses and their fine. Check the fuse panels. ...

I have a 1994 Ninja Kawasaki 250 but I no longer have the keys for it. I tried taking off the gas cap to get a copy of the key but it wont come off. Now I took off the 8 screws that keep it in place. ...

Question about 2005 Ninja 250 R

1 Answer

How do I remove the 14mm bolt holding the generator rotor to replace the starter gear behind it.Is it regular threading and how do I keep the engine from turning? REGULAR/ PUT IT IN GEAR WITH THE ...

Question about 2005 Ninja 250 R

1 Answer

I'm trying to remove my damaged clutch pan so i can put the new 1 on but it seems to b stuck. All bolts r out & there is plenty of slack on the clutch line, but the line is still conected to ...

starter made a grinding sound in motor and now just spins free You need to remove the starter & replace the bendix drive.  The bendix is what engages the starter gear to the ...

I lost the keys to my 2005 ninja 250 and had to replace the ignition but i had to hot wire it to get it home I have since replaced the ignition and now it won't start I'm getting power to the ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Manuals & User Guides

Loading...