...trigger is pulled there is flow but no pressure the motor cuts in ok, i have checked the inlet filter, please help. your pressure relief valve is stuck open. try adjusting the nut shaped stem on the ...
Question about Karcher G2400HH-R Pressure Washer
...karcher 2400 psi pressure washer and it doesnt get water pressurized when pulling wand trigger. the most comon problem with thease is a stuck bypass valve, this is the valve that alowes the water to ...
Karcher 550m down on pressure Hi, I also have a Karcher 550m but it doesn't switch off when the trigger is released & it is down considerably on pressure. There is little difference between pump ...
...pressure release . this the second washer with this problem. any help? I'm not real clear on what you're saying, but I think it's that the trigger will not shut down the pressure as it should. It ...
...Karcher pressure washer motor constantly runs with no pressure coming out of trigger gun.I have tried another gun with the same result.The motor should stop/start when you press gun.The model is a ...
karcher k3.86 motor runs but has no pressure when trigger pulled, motor doesn't go faster. Could be a pump, but most likely the unloader valve is stuck open. After replacing/repairing the valve, do ...
Question about 2500 PSI Pressure Washer
trigger pressure will not come back Run at pressure. release trigger on wand to reposition, I loose all pressure to the wand. Let it cool down 20 minutes, Pressure is back until I release the trigger.
it how do i fix it IF YOU HAVE BEEN USING THE PRESSURE WASHER AND THEN TURNED IT OFF,THERE WILL STILL BE PRESSURE IN THE HOSE.YOU WILL NEED TO SQUEEZE THE TRIGGER ON THE GUN WHILE YOU START THE ENGINE
Question about K3.68MR Electric Pressure Washer
...Karcher model K 368 M will not re-engage for several minutes after the trigger is released. If I repeatedly squeeze the trigger for a few minutes, eventually the switch will engage and the pressure ...
pressure washer pump not pressuring Some of these pumps have a pressure bypass valve when you release the trigger on the gun it won't blow the hose ( safety feature) I could be that the vale is stuck
Usually answered in minutes!
1,998 Questions
1,006 Questions
778 Questions
1,057 Questions
700 Questions