Questions & Answers for: jumpers

I need to reinstall my driver. My computer is telling me that the floppy is not formatted. How can I get a new driver so that I may download my pictures? Thank you for any assistance in this matter. ...

...to switch this. Does the mobo automatically detect the fsb speed on the cpu? Clear CMOS jumper Jumpers to enable system wake up on keyboard or USB devices PS/2 keyboard power jumper Fan power ...

...a 10.1gb Maxtor model 31024H1 IDE hard drive and i need the jumper setting for slave slave is NO jumpers at all (Master) - The vertical jumper over the J50 pins is configuring the drive as a

jumpers guide Maxtor 2B020H1 20Gb Slim IDE 3.5'' Hard Drive jumpers guide master & slaved 4 two drives Maxtor jumper as follow: looking at the connector top row 5 pins, buttom row 4 pins. the single ...

reinstalling the original cd rom that came in the computer. do i need to change the jumper settings. it is a samsung sc-148 That depends upon the IDE cable you are attaching the CD ROM to. There are ...

...read your motherboard manual to check its location. If you don't have the manual then look for the jumpers near the CMOS battery. Most of the manufacturer label the jumper as CLR, CLEAR, CLEAR CMOS, ...

...read your motherboard manual to check its location. If you don't have the manual then look for the jumpers near the CMOS battery. Most of the manufacturer label the jumper as CLR, CLEAR, CLEAR CMOS, ...

were do the jumpers go on a optiplex 330 There is the Password jumper (PSWD), and the CMOS jumper.The CMOS battery is also termed the RTC battery.Real Time Clock battery.The CMOS jumper is labeled as ...

Jumpers Serttings on Quantum HD Where are the jumper pins and what are the slave settings. Only jumper I found has ..CS..DS..and SP. Right now the jumper is on the DS pins. Thanks! Nick CS = Cable ...

jumpers How do I install cmos jumpers on dell inspirion 530s Remove the jumper plug from the CMOS jumper (CLEAR CMOS) pins 2 and 3. Place the jumper plug on the CMOS jumper (CLEAR CMOS) pins 1 and 2 ...