...hard drive. Any help would be great what you mean hard drive? did you mean hard disk ok! theres a jumper at the back of the hard disk so a mother board can recognized if one your hard disk may set ...
Question about Precision 340 PC Desktop
...advertized. Thanks Richard open your cpu then remove cmos cell for 10 seconds. alos near cmos u see jumper it is set in 1-2 posirion change it to 2-3 thne power up the computer then again set it to ...
settings are: Locate the 3-pin CMOS password reset jumper on the system board. Remove the jumper plug from pins 1 and 2. Place the jumper plug on pins 2 and 3 and wait approximately 5 seconds. Replace
...settings, re-insert battery, CMOS PW should now be cleared You have to clear your CMOS to remove the bios password. Power down the computer, disconnect the external power supply from the computer. ...
will not read cd or dvd This is a common problem when drives are installed or removed. Please check your jumper settings if this is the case. If not, you may want to replace the drive with a DVD/RW
...jumper settings.For that you need to open back cover of laptop then find motherboard pull cmos cell from motherboard for 10 minutes then reattach it into it's position.There jumper near cmos cell ...
...from Hiren's Boot CD as it's pretty hard to open it up and reach for the CMOS battery or the jumper. To set up a password, go into BIOS by pressing DEL key on start up and under Security set ...
jumper or a small screwdriver. Do this with the main power cord disconnected. This will reset everything to the motherboard maker's default settings. Open the case and find the model number of the
DELL COMPUTER WON'T SEE SLAVE HDD Make sure the jumper on the slave hard drive is set to SL (slave).
Usually answered in minutes!
114 Questions
83 Questions
45 Questions
44 Questions
35 Questions
