Questions & Answers for: jumper Cars & Trucks

Question about 1998 Bonneville

1 Answer

...need the instructions to program a factory remote. 95 bonny--1-turn ign switch off 2-using a fused jumper wire jumper data link connector #8 blk/wht wire to #4 blk wire (look under dash for dlc) ...

Ad

when i turn the ignition nothing will happen but when i hook it up to jumpers it wants to turn over ,as soon as i remove the jumpers there's no power when i turn the ignition it wont make a sound ...

Ad

My 1998 Jimmy won't start. Just got a new starter. My battery is drain, when i use the jumper cables it still won't turn over. with a new starter, this sounds like a bad battery cable or terminal end.

Question about 1995 Sebring

1 Answer

...hand side of the car, in the engine compartment, remember when you jump start it to hook up the jumper cables like this; negative jumper cable to negative battery terminal on your car, then ...

...You can jump the car without opening the hood.Jack the vehicle up on the starter motor side.get a jumper battery and jumper cables.with the jumper cables connect the positive terminal of the jumper ...

Question about 2012 Q5 2.0T Premium quattro 4dr SUV 2.0L 4-cyl. Turbo AWD 8-speed Automatic

2 Answers

t have keys on them if it is like my Holden omega which has the battery in the boot there will be a jumper post in the engine bay that you jump to a car like when jump starting cars . Or put a charged

car will not stay on at idle with or without jumper cables? alternator has been replaced and a new battery has been replaced. Have started the car with jumper cables but when I take jumper cables off,

Question about 1993 Metro

1 Answer

...connector called a DLC data link conn. the codes are DTCs (modern jargon) diag, trouble codes. you jumper 2 pins, like all cars of this era. (most) covered in the FSM book by suzuki or Geo (GM) or

I have a 98 isuzu rodeo and my friend hooked up the jumper cables wrong one day and now none of my dash lights or any of the switches on my dash work (4x4, cruise control, etc.) and it's stuck in 4x4 ...

...under the engine, if you are careful. First find the hot terminal on the starter and connect the jumper cable. Connect the other jumper to the frame. Then connect the jumpers to another car or ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

Manuals & User Guides

Loading...