Questions & Answers for: Medion jumper

...the powercable, 2. open your Desktop CPU, 3. look for the CR2032 Button battery, 4. locate the jumper near this Battery with CLEAR CMOS label. 5. change the setting of this jumper by removing

...news. But before we jump to any conclusions, first open up the computer and look for the BIOS reset jumper on the motherboard, if you find it switch it to clear CMOS for around 20-30 seconds and then ...

...home installation is reverse of the listed procedure. One thing to not is the position of the Jumper on Slave, Master, or Cable Select. This will be explained on the instructions that come with ...

... Have you booted quickly before ? If this is your first boot check the boot order in BIOS , the HDD jumper settings and make sure master is master and slave is slave , also new bus cables could fix ...

Locating the CMOS battery, DIP switch or Jumpers Hello, I have a MID2020 Medion Laptop, I have forgotten the startup (BIOS) password, therefore I CANNOT use the laptop at all. I have read that I can ...

rebuilt to check for loose connections. Tried every hard drive setting available in bios, tried all jumper permutations on the drive iteself. Help!!!! probably the mother board.if you boot from the CD

...and find your motherboard manufacturer, model and version numbers. You might be able to find the jumpers without google, if you look on the motherboard, there will be 3 pins and a jumper on either ...

...this would reset the BIOS. Can anyone help you could try resetting the bios by opening the correct jumper on the mother ...

...Lucky for me it was still under warranty. The technician came out to my office and removed a jumper from the mother board and then replaced it in the same position. I assume that this reset

...do you have vista or xp? Do you mean the BIOS password? If so almost all motherboards contain a jumper that can clear all CMOS settings along with the BIOS password. The location of this jumper ...