Questions & Answers for: Gigabyte jumper

...stays blank Hi , Have u tried? First u clear the cmos means beside the battery there is one jumper with 3pins (2 pins are shorted with jumper) U put the jumper in 2,3 position in system off ...

...award bootblock bios v1.0 bios rom checksum error check the manual , there is a jumper plug that allows you to move a jumper over to reset the bios to default , ie , the jumper ...

Drive..... What is this? please help me. Hi how are u, it is simple problem friend Your motherboard jumper setting has been changed. please read manual of your motherboard jumper setting if u not have

...to know that , for BIOS updates in GA-K8VM800M motherboard, whether it is necessary to alter the jumper settings or not. If not, then please tell me about a Gigabyte model in which it is

...motherboard. Will not boot. Phase Led lights flash on then off. Help CLR_CMOS (Clearing CMOS Jumper) (next to the battery) Use this jumper to clear the CMOS values (e.g. date information and ...

...channel and the cd drive on the same channel as one of the hard drives. You have to make sure the jumper settings on the drives are correct (1 master and 1 slave) when placing 2 drives on the same ...

How do i program the jumper and the switch the jumper settings is 1 and 2 is default. 2and 3 is normal mode. without jumper it reset mode for CMOS jumper settings. which switch do u mention? let me ...

...the solution if I could have been of any help! CreativeTECH Almost all motherboards contain a jumper that can clear all CMOS settings along with the BIOS password. The location of this jumper ...

hi... i have gigabyte ga-945gcm-s2c and i dont know where is the jumper to bios clearing CMOS... please help me to fix this problem... thanks before.... You can get the manual here: ...

i want to reset BOIS password for Gigabyte GA EP43 motherboard which has no jumper, i try to remove battery but the problem unsolved~ There is a CLR CMOS jumper on that MB next to the SYS FAN 2 ...