Questions & Answers for: EliteGroup jumper

called them and no one seems to know it. I know on the old 486s it was just a matter of pulling the jumper on J14 but I can't find it on this motherboard (P4VMM2). Can you help me clear this password?

...me a frontpanel for headphones, but when i want to connect them i have a problem with the internal jumpers on the motherboard. When i remove the jumpers to connect front panel, i don't have any

Jumper Settings I recently took apart my computer, Elite Group p4s5mg/gl+ because I had to reformat the hard drive. Now I have I took one jumper out to use on a dvd rom for another computer. I dont ...

a friend install my mother computer. how to jumper k7sem rev 3.0 motherboard.he put password on bios need to change boot order. to bot from new dvd rom i installed. cannot accees bios because password

p4vxasd2+ motherboard what kind and size jumper caps do i need to change over to ddr memory, i think you need to short out all the pins that run along one side of the motherboard,, the ones i bought ...

ECS P4IBMS Motherboard CPU Voltage Jumper Settings There are five cpu voltage jumpers on my ECS P4IBMS motherboard (VID0-VID4). I'm upgrading from a 1.75 V cpu to a 1.525 V cpu and am trying to find ...

i do not set FSB 533,change jumpers JP1A1 and JP1B1 is not effect 1.Do you have the jumper for JP1A1 on pins 2 and 3? 2.Do you have the jumper for JP1B1 on pins 1 and 2? On that 6 pin jumper block, ...

where the jumpers are put on in the same where the jumpers are put on in the same mother board I went to the ECS website and under socket 478 for your board I was able to bring up yhe manual. You will

jumpers on ECS L4VXA2-BIGEST PICTURE I ask for jumpers on ecs L4VXA2 where nowone jumper and to let me see them on a picture a biges one [email protected] go to web site of board download them jim

need image of jumper settings for l7s7a2 rev 1.1 motherboard Elitegroup Computer Systems (ECS) Support > ECS L7S7A2 > Main Support ...