to countershaft i have a 1999 explore with a SOHC the chain tensioner broke on the crankshaft chain and the chain jumped i need to know how to time the crankshaft with the countershaft Hope this helps
...jumped time, I just put in a different used engine in last night, I drove it for about 3 hours last night it drove good. This morning I went to crank it up and it jumped time again. What happened and ...
Starts up fine sometimes, other times it wont start up with a jump. Fuel pump replaced last year, new starter, battery and alternator..... Sounds as if the p[roblem may be the solenoid. ONe way to ...
98 Ford Explorer erratic cold idle / SOHC engine / idle continuously jumps from 500 - 2500 rpms when cold / is fine when warm 98 ford explorer erratic idle from cold reves jump. ok when warm but still
Looking for Timing Chain Guide Rattling noise in the engine, diagnosed to faulty timing chain. We've got the timing chain, but now looking for Timing Chain Guide to complete the fixing Check with Auto
(04 ford explorer xlt) left lights on for about 1-2 hours without noticing. car wouldn't start of course. tried jump starting it. it only cranked over 3 times. then after that it just wouldn't do ...
Question about 1995 Explorer
i need to know how do u set the timing on a ford 5.0 with wireless distributor The timing is factory set- (nonadjustable). You can check it the same way you would check any other engine. When the ...
timing belt jumped I think you have a timing chain
on 2002 ford explorer,4.6-v-8, when i was changing timing chain guides and adjusters the chains jumped teeth on the crankshaft. The manual says the left camshaft timing mark should be approx. @ 11:oo
Question about 1996 Explorer
Driver side head light not working replaced plug didn't help I ran jumper wires to passenger side for time being taped will that be ok for time being Jump wires will be ok Make sure you have correct ...
Usually answered in minutes!
2,998 Questions
2,307 Questions
2,248 Questions
2,302 Questions
1,513 Questions