Questions & Answers for: Plymouth jumped time

van wont start I recently have had electrical problems with my 1998 Plymouth Grand Voyager. Sometimes it wouldn't start, all the lights would just flicker. I tried checking all the fuses, including ...

...jumped time?#2 how do you know this? if in fact it has jumped time you will need to have the timing belt replaced.the average interval for replacement is 60,000-80,000.it is also a good idea to ...

car wiil not start while turning key but makes a ticking noise Obvious choise is a dead battery. Check your lights, horn (horn often sounds weak or sickly with a dead battery.) If a dead battery, ...

...jumped back and forth an nowe batery si dead will start with jump.alt si only 10 mounths old.could it be anneything els? alternator's go bad - even some new ones are no good - prolly a rebuilt one ...

timing belt broke and jump timing how do i get My 1994 V6 3.0L Plymouth Voyager timing belt broke and jump timing how do i get TDC. If you have the harmonic balancer still attached you can align the ...

...intake Sounds like the ignition timing is not right. Check to see if the timing belt has slipped (jumped a tooth) and that the belt is tensioned appropriately. Sometimes another pulley can be loose

2000 plymouth breeze 2.4 jumped timing and now leaking antifreeze. Driving home and heard a noise as if I had run over something and it was under my car. Nothing was there but then the car died, and I

getting a p1390 code on my 97 plymoth breeze 2.0 liter The timing belt has jump a tooth.Your timing belt needs to be replaced before it causes valve to piston damage.which could be fatal

...the plymouth neon has a 2.0l engine, we started the car, it ran fine, but when we drove it, the car jumped and died and now it will not start. The timing belt could have been loose, or the tensioner ...

1996 plymouth breeze jumped timing after timing belt replaced ran at idle for 20 mins then stalled no start check that the belt has not come off it is doubtful that the belt will "jump" timing after ...