Questions & Answers for: Lasko jugs small ball pitching machine

my fan is spitting out little dust balls cani my fan is spitting out little dust balls can i take it apart to clean it the best thing to do is take something and wedge the blade so it will not turn, ...

...small phillips. As I suspected, the "thrust bearing," which supports the rotating components, had become "stiff." I thought that it would be a non-friction (ball bearing), but it is only a bushing, ...

how do i lube my fan motor it's a brushless style With the fan unplugged, as best you can, remove any debris that may have collected on or around the armature of the motor ends. After doing this, ...

Fan rattles when running. It appears that the fan blade hits the inner plastic piece behind the fan blade. Something is loose or the fan blades are bent. Check the whole unit or straighten the blades.

High pitch squealing when i turn on fan when i turn on the fan there is a high pitch squeal. bearing gone or rotor blade scraping against outer cover

where is thermal fuse on lasko fan Lasko Cyclone fans have a thermal fuse (typically 130 degrees C) placed on the armature of the motor, connected between the input voltage line and the start ...

...machine stop working and had funny smell? what wrong with fan it stop working and had funny smell? Well,,, if it had a funny smell,,, along with not working anymore, than either a wire burned up or ...

...small black ball at the end, glued to the back of the plastic cover..i guess it feels the temp//air flow sucking through it well anyways i cut it and left the the 2 little black wires disconected and ...

What do I do if a small wire came loose on the control knob? Sounds like you may need to solder it back on to the switch contact

My lasko 1128 humidifier keeps making this gurgling sound while in use? I just got the machine and there is still water in the jug but the gurgling sound continues. I know once you first get the ...