...Janome Harmony 2041 suddenly stopped and the needle is jammed I am a sewer so I can explain to you what to do you lift it up your needle might break. If so you twist the thing and take it out. Then ...
janome 5700 handwheel stuck/inside pulley stuck handwheel won't turn. when changing fuse noticed handweel was stuck. outside belt turning freely but inside belt/rods are stuck. when machine turned on,
Question about Memory Craft 9000 Computerized Sewing Machine
Janome 9000 Needle Keeps Breaking! I'm trying to embroider a towel. Using the P foot, but have broken 3 needles in a row! The foot is on tight, and so it the needle - and inserted correctly. I am new ...
Question about Memory Craft 9000 Computerized Sewing Machine
...of the machine correctly. If this does not solve your problem, please respond. I have a Janome 10001 and the needle threader is stuck in the down position and I cannot get it up. Help, please
...needle on my Janome HD 3000 seems to be jammed into the clamp. I don't know if something is mis-aligned or what, but it is driving me batty. It shouldn't be so difficult to change a ...
Question about Memory Craft 9000 Computerized Sewing Machine
...janome jamming fly wheel won't turn fly wheel won't turn warning for too thick material, bent needle, something stuck in machine. The machine does not have anything stuck in it nor is the ...
Question about Memory Craft 9000 Computerized Sewing Machine
...janome 11000 memorycraft's needle threader has jammed in the down position and cannot be moved my needle threader has jammed down in my Janome memorycraft 11000 and I can't move it. What ...
...allure janome machine Have you had a broken needle? If so..... is the bobbin area free from debri? Did the needle strike the bobbin case (may have damaged it). Did you put a NEW needle in the
Question about MB4 Four Needle Embroidery Machine
...several times. I also removed needle plate and cleaned thread cutter. Do you have the MB-4 instruction Manual? ...
Question about MB4 Four Needle Embroidery Machine
My janome J3-24 needle does not catch bobbin thread. It does not go down enough and gets stuck If a brand new needle does not resolve the problem, take it for service.
Usually answered in minutes!
760 Questions
764 Questions
564 Questions
565 Questions
372 Questions