Question about CS-8060 Computerized Sewing Machine
...jammed wheel will not turn a loud noise whenever ewe try to start Thread is caught in the hook...Remove the upper thread and bobbin case, turn the hand wheel backwards and forwards by hand and remove ...
Question about CS-8060 Computerized Sewing Machine
...machine jammed wheel will not turn Thread is caught in the hook...Remove the upper thread and bobbin case...turn the hand wheel backwards and forwards by hand and remove the thread remands. Good ...
andmake sure that the tension wheel is clear of any broken threads and is on the correct setting. It may have been threaded wrong. The hand wheel not turning sounds like the bobbin area is jammed also
jammed machine is caused by thread being caught in the hook. Remove the upper thread and the bobbin case, turn the hand wheel towards you (counterclockwise) by hand and remove any thread in the bobbin
Question about 2517 Mechanical Sewing Machine
jammed machine is caused by thread being caught in the hook. Remove the upper thread and the bobbin case, turn the hand wheel towards you (counterclockwise) by hand and remove any thread in the bobbin
Question about 2517 Mechanical Sewing Machine
...jammed in the machine 2. is the needle bent 3. is the material too thick then I noticed the hand wheel was very tight. How can I fix this. There is no broken needle, thread, jam or anything. I have ...
Question about 2517 Mechanical Sewing Machine
HAND WHEEL ON JANOME 350E HARD TO TURN AND MAKE SQUEAKING NOISE THEN JAMS. HAND WHEEL VERY HARD TO TURN WITH LOUD SQUEAKING SOUNDS, THEN JAMS. HOOK RACE AND BOBBIN CASE CLEAR OF LINT AND THREAD. Have ...
...are found to be normal, lower the front wheels and lift up the rear wheels. If any of the rear wheels are found to be partially of fully jammed, readjust the rear brake system or hand brake
...My hand wheel is hard to move and will not make complete turn unless... https://answers.yahoo.com/question/index?qid=20100518074139AAeeykz Help My Needle Hand Wheel are Stuck Sewing Machine Jammed
hand wheel to lock up. Adjust the thread tension to the correct setting. Check for any jammed or broken parts. If any parts are broken or jammed, they may need to be replaced. Check the manual of your
Usually answered in minutes!
760 Questions
764 Questions
564 Questions
565 Questions
372 Questions
