Questions & Answers for: jacuzzi jet adjust

...jacuzzi (motor turns runs but nothing coming from jets) I fill up the tub and turn on the jets, but nothing is coming out of the jets? What does this mean? Is this something that i can fix myself?? ...

Ad

Question about Signa 6 Whirlpool JAC-B540...

1 Answer

water not coming out properly from one of the jets i sat in my jakuzzi for 30 minutes and it went off for 7 seconds and came bach on its happened to me twice can some body help me. and the other ...

Ad

Question about Signa 6 Whirlpool JAC-B540...

1 Answer

restricted flow Jacuzzi spa pump runs fine on low, but seems restricted on high. When switched to high, the pump "jumps" like it is trying to push water but may be blocked. The jets seem to have a ...

Question about Signa 6 Whirlpool JAC-B540...

1 Answer

...I have an jacuzzi tub and some of the jets dont work, how can I unclog them? jets don't 'clog' - turn the face of the jet nozzle - it is perhaps an adjustable jet you have that has been turned

Question about Antiquity 2038.016.020 White Elongated

1 Answer

jacuzzi tub will not work. motor hums but jets do not come on is this a new install? if so you may need to adjust the air intake. Or if you have kids they may have messed with the settings. If the air

Question about 5' Jacuzzi Tub Bathtub Cetra 532 H525-969

1 Answer

I have a jacuzzi corner tub. The control panel I have a jacuzzi corner tub. The control panel has three dials. two for adjusting the jets and one in the middle for turning on the jets. This switch ...

Question about 5' Jacuzzi Tub Bathtub Cetra 532 H525-969

1 Answer

water coming out of adjustable air vent behind wall of tub one or more of the jets are turned off. i would suspect someone is plugging the jets off which causes water to go backwards in the system and

Question about 5' Jacuzzi Tub Bathtub Cetra 532 H525-969

1 Answer

fill tub, press button, hear motor but no bubbles,etc coming from jets Are the jets open? The center of the jets turn to adjust the pressure of the jets. If this is not the problem, there may be a ...

...Jacuzzi brand jetted tub, so I can use less water and still have a water level above all the remaining jets? To disconnect one of the jets to get more water flow to the other jets may not be very ...

Question about H270-959 Nova 5 Whirlpool Bath with Integral Skirt 5'- White

1 Answer

The presure is coming out of only one jet what causes that Check the faces of each one of your jet trim. It could be that they are adjustable and have all been turned down or off except that one jet ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Top Home Experts

john h

Level 3 Expert

29494 Answers

Brad Brown

Level 3 Expert

19187 Answers

ADMIN Andrew
ADMIN Andrew

Level 3 Expert

66957 Answers

Are you a Home Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...