...jack stands. A handle on the jack is moved up and down to raise part of a vehicle and a valve is turned to release the hydraulic pressure in the jack to lower the part. At the end of the jack is a ...
car from the front tow hook, place your axle stands under the front jack points, then let the car down onto the axle stands. Always use axle stands when working on your car, never trust the jack alone
...jack stands, besides the 4 points where you'd jack to change the tire? I can jack the car then place the stand in the same place...Help me out...Thanks. that is the preferred place designed by the ...
Question about 2003 Range Rover
...stands when using a jack. Before commencing work on underside of vehicle re-check security of vehicle on stands. Reverse procedure when removing vehicle from stands. Raising the rear of the vehicle ...
On one jack stand. Problems How to put on jack stands Jack the car up, insert the jack stand and lower the car. Only put jack stands on one side of the car at a time.
...jack stands are too short for same. in the past I have had to do this, and with car not moving, required jacking truck up jjust to get ramps in place under tires. not fun but possible. It is very ...
...jack stands uder a 2001 Lincoln LS WHERE DO I PLACE FLOOR JACK TO RAISE UP AND PLACE 4 FLOOR JACK STANDS UNDER CAR place the trolley jack under the front cross member . (The big bit that connects the ...
Question about 1999 Boxster
...jack stands if I'm jacking up the front driver side The intent of a jack stand is to provide safe solid support for the vehicle while you are performing work on it. Going under a supported vehicle at ...
...jack stands on a 2005 Chevy equinox Do you know where the lift points are on your vehicle? Your owners manual shows this info. Sometimes I try to put jack stands as close as possible to the jack. I ...
...to lift 2009 suzukis50 for storage To lift a 2009 Suzuki S50 for storage, you can use a motorcycle jack or a center stand. Here are the steps to use a motorcycle jack: Place the motorcycle on a flat ...
Usually answered in minutes!
4,236 Questions
3,749 Questions
3,350 Questions
3,279 Questions
3,219 Questions
