Question about BRAVIA XBR 52 in. LCD Flat-Panel HDTV
...IR code - 01775. RM-YD029 (Sony TV KDL-46Z5100's Remote) Codes: Receiver (Sony STR-DH700) Code = 52172 DISH (VIP722 DVR) Code = 00775 DVD (Philips DVP5990/F7) Code = 31354 5.3 IR (DISH VIP722DVR ...
Question about BRAVIA KDL-40S2000 40 in. LCD HDTV
IR remote. I also have a 46 inch Bravia, and the remote does work with it. The front panel controls work okay. The remote worked for about 2 years, then just "died". Had the same problem. The infrared
...on the camera, then the problem is in the TV IR receiver or the main logic board; more troubleshooting with scope will be needed to look at the signals. Parts: www.shopjimmy.com ...
...button is pushed. If you do see the flashing on the camera, then the problem is in the TV IR receiver or the main logic board; more troubleshooting with scope will be needed to look at the
...IR receiver board, you can try replacing the IR receiver module. try WWW.SHOPJIMMY.COM http://www.fixya.com/support/r5093881-lcd_flat_panel_tv_troubleshooting_guide ...
...IR receiver or the main logic board; more troubleshooting with scope will be needed to look at the signals. Parts: www.shopjimmy.com www.remotes.com Basic troubleshooting guide here: ...
...IR receiver. What do i need to buy to get a new receiver The infrared pickup is usually on a separate printed circuit board near the front bottom edge, but it may not be simple case of just replacing ...
Question about Bravia KDL-26L5000 26 in. LCD HDTV
...IR receiver board located on the front of the TV, or worst case will be the main board that is not processing the signals from the IR receiver properly, so far I cannot locate the repalcement IR ...
Question about BRAVIA KLV-37U300A 37 in. LCD TV
...IR remote receiver board on the front of the TV or the main board is not decoding the signals from the remote receiver board. You will havwe to open up the TV to check or have the repair person fix ...
Question about Bravia KDL-46X2000 46 in. HD-Ready LCD Television
...be started form the panel power button. The remote is working fine but the tv cannot receive the ir Sounds like a main board [motheboard] fault. Contact service
Usually answered in minutes!
541 Questions
531 Questions
381 Questions
277 Questions
252 Questions