IR Reliability--Intermittent The receiver works well in all respects...but often it will not respond to IR commands. I've tried other remotes, eliminating my repeater, new batteries, etc. Nothing ...
IR receiver on unit not working? I have been unable to control my VR-505 with the remote control for a long time now. Eliminating all obvious possibilities such as batteries, I attempted to program my
IR receiver on unit not working? I have been unable to control my VR-505 with the remote control for a long time now. Eliminating all obvious possibilities such as batteries, I attempted to program my
remote not working, can I control with a universal remote? no, you need the Original Remote Bad IR solder inside of the receiver. I have same problem.
Question about VR-6070 Receiver
...receiver's IR sensor is on the same "volume control assembly". I guess I'm kinda hoping for someone who has access to the service manual to help me to know whether I'd have to replace the "volume ...
...IR detector in the receiver, use a multimeter to check the voltage on the IR detection as the remote is used. If there is no voltage check and change the IR, if not the signal track must be traced to ...
...kenwood receivers are notorious for having cold solder joints on the IR receiver...resolder joints like this http://mysite.verizon.net/amp68/ or ...
a remote to run the kenwood vr-510 receiver The Logitech Harmony 700 (IR) works great for my Kenwood VR-510 plus my other video components. Got from E-Bay for $144 with 3 yr warranty, around June 2013
...a "normal" problem with this model. I have two of them with the same problem. Solved ressondering IR
...IR LED receiver. In some cases it may be debris between the LED and the cover. Hard to see if it is dark glass/plastic. A can of compressed air aimed through a vent toward the LED might work in a ...
Usually answered in minutes!
23 Questions
21 Questions
5 Questions
4 Questions
7 Questions