Questions & Answers for: Yamaha ir receiver Cameras

...IR TV remote to also operate my Yamaha RX-V800 AV Receiver but can only get it to turn off. Can anyone tell me the proper yamaha code(s) to turn the receiver both on and off? (I have the RX-V659). ...

...the code for a Scientific Atlanta Explorer 8300 HDC. I've been told that even with the correct IR Code the remote may not work with the Yamaha RX-V663 remote...could this be possible? Your help ...

...receiver if it does work with IR lights to blind it from the remote. But doing so will also blind it from its own remote and you might have to resolve to operating the receiver by hand. If it woks in ...

...on/off power switch among other functions. some things like vol work... You have to "learn" the IR. Yamaha has discrete on and off commands. which universal remote are you

...IR code from the original remote.so the unit is not detecting all the command from that remote. try getting the original required remote made for this unit. you can also check out getting remote from ...

...receiver's remote If the controls still don't work, there is a problem with either your IR receiver on your receiver or the the circuitry that proceesses the signals into commands. Good

...receiver is unobstructed. Also, IR remotes are a "line-of-sight" type device and must have an unobstructed view of the device being controlled. Has the corect button been pushed to select the ...

...amp it is transmitting however the amp is not responding to commands. ive tried resetting the remote to facory it did not work The IR receiver or associated components inside the amp may have ...

...IR receiver (1)locate the front panel. (2)find out IR receiver. (3)find an analog multimeter with 0.5V selected. (4)black probe to ground, while red one to IR pin. (5)press any remote ...

...IR. My receiver will not work with any remote, firestick remotes and the original from Yamaha. IR is unobstructed, clean, and confirmed IR is being sent from all remotes using a camera. Removed ...