Question about ProCurve 2626 (J4900B) 24x10/100 Mbps Networking Switch
...priority 6 Need to set it to the Vlan config t(vlan 101)= qos dscp 101110 ip address 192.168.101.2 255.255.255.0 qos dscp 101110 voice exit This a a common differ-serv 46 priority 6 for IP phone ...
Question about LaserJet 4000 Printer
...item until config tcp/ip NO shows, press value Yes press select. This should get you into the tcp/ip menu. use item, value and select keys to navigate to the setting you want to change. hope this ...
...ip You can go to the configuration menu, then look for network config. or network parameters, if ask you for dhcp or manual select manual (or static), then it;s gonna ask you for the ip address, it ...
...config-network" script and change the bond0 ip address from 10.1.1.5 to 10.1.1.3. Then restarted network service. The host lose netwok connectivity, doesn't respond to either .5 or .3. I reversed the ...
...config is showing IP as 0.0.0.0 set in manual. Cold reset does not go back to factory default. Cannot manage/connect using the default web ip I had the same problem with this printer. I tried cold ...
...IP address with the HP Designjet 5500, follow these steps below: Press the Down Arrow keys on the front panel until the Setup Menu is displayed. Press ENTER. Go to the Utilities menu and select Test ...
Question about Color LaserJet 5500 Printer
IP address and all was well. Printed a config report and there is no IPv6 Address. The second printer I tried to set up I did the same thing, but IPV6 shows an address and I can't get it to print.
Question about LaserJet M4345 MultiFunction Printer
IP. 6 Touch CONFIG METHOD, and touch MANUAL. 7 Touch MANUAL SETTINGS 8 Touch IP ADDRESS 9 Touch the left arrow or the right arrow to highlight each segment of the IP address. 10 Use the numeric keypad
...address how to change or assign a ip address on my printer 9050n Go to the config device menu and scroll down until you see ip settings. From there select manual settings and you can retype from ...
...config page was added until later models. Go to internet browser in system, type printer ip., enter., you can see the printer information (called zet admin).You can observe the entire facilities how ...
Usually answered in minutes!
5,069 Questions
2,066 Questions
1,757 Questions
1,195 Questions
1,096 Questions
