Questions & Answers for: inverter overload

thermal overload occurs I too am experiencing an "oc2" on my gvx1000-1.5-t unit after replacing original motor with near identical, however, relacement motor is rated for 60hz and the vfd is ...

...overload and fuse blown,what do i do? I have an Aims 2500 W inverter that was damaged from an accidental connection of voltage from the grid. i replace all of the IRF260n FET transistors but it is ...

...inverter goes to overload as soon as the load reaches 1.2kva or when fridge compressor stars and the load is about 900Watts, Please advice and thanks in advance. It sounds to me that the inverter is ...

...inverter 1500va, when I put it on it shows overload without any load internal problem have it checked out by an accredited service repairer Check the input fuse may be it's blown ,thus the most ...

...inverter is showing overload 850va It sounds like you are drawing too much power. Pull all the power from it and try again without ANY load on it. If it comes up in the overload condition, then the ...

...light on the inverter overload will not go off when pressed This condition occurs when the inverter has failed due to excessive load. Usually, the inverter must be replaced once this condition

...Inverter goes into overload protection with no ac load. Ahaaa, usually indicated MOSFET or transistor problems... Here is a link to your manual that offers LOTS of 'troubleshooting' ...