...Intruder 1500 LC year 2000. I have problems with the start up, According to the mechanic there is not electircal conductivity from the Igniter to the sparkplugs. My bike has 31,000 kms. and I beleve ...
coil to the forward cylinder. How can I check it and what would be the test specs? Any help would be appreciated. If it could be something else, don't hesitate to recommend a test. Thanks Non-Guru Hey
...intruder vs800 gl Bike runs but lights aren't working - no headlight, turn signals stay on but only blink once. Don't see any loose wires. Any suggestions? Have you check all the bulbs condition? ...
...intruder 800 is losing fire on one cylinder sporadically I would start by replacing the ignition coil for that cylinder. It could be failing when it gets hot. If that does not sove your problem ...
# 1 Cylinder has spark and #2 cylinder doesn't. Where should I start testing. What could be the problem? try switching coils. if cylinder with spark changes, you will know you have a bad coil.
...intruder 800 turns over but won't fire and start? changed the plug, but didn't fix problem? what else could cause this? also how do you clean the hole the plug goes into? it looked like it had some ...
Question about 1994 VS 1400 Intruder
...intruder 1400 it is only firing on the rear cylinder. new and properly charged battery, new front coil, new plugs properly gaped. it will start easy and idle even run ok. ive removed and gone through ...
Question about 1994 VS 1400 Intruder
...outher cylinder but the coil is getting no fire to the coil .intruder 1400 runs on one cylinder .but not to the douther no fire at the plug or coil check for problem igniter for the cylinder not ...
Question about 2004 VL 1500 Intruder LC
intruder 1500cc.after riding when the bike is hot will not turn over.after it cools down it starts right up.is it starter problems @ An electrical part is worn causing ovrheatn. Ignition parts need to
Usually answered in minutes!
652 Questions
681 Questions
595 Questions
586 Questions
644 Questions