...intake plenum on both the 3.3 & 3.8 litre engines. Once the plenum is removed, the plugs and wires are extremely accessable from within the engine compartment. When reinstalling the upper plenum, be ...
...INTAKE PLENUM GASKET HAD PIECE MISSING OUT OF IT..MISSING ON #5 CYLINDER AS WELL..GASKET WAS ONLY ABOUT 10 BUCKS AND I REPLACED IT IN ABOUT 30 MINUTES..TOOK ALL BOLTS OUT OF MANIFOLD AND JUST LIFTED ...
intake plenum, remove the bracket from the alternator, easy, and the hardest part is just removing the bracket holding a wire harness from the back of the plenum, the bolts are a little hard to get to
Dealer says there is a hole blown in the untake Dealer says there is a hole blown in the intake plenum and he has to replace it....$700.00!!!! sounds about right did you see the hole yourself
...intake plenum (the very top silver box under the hood). An easy way to check is to see if the enigne will start in neutral as well as park. If it doesn't, adjust the linkage. Next, right behind the ...
...above valve cover. Let me know if you need any help diagnosing this vehicle. It should be in the intake hose between the air filter and ...
...plenum off to get at the plugs in the back,is there a procedure for that? WHEN YOU REPLACE IT THERE IS A TORQUE SEQUENCE! STARTING WITH THE FRONT LEFT CENTER (1), THEN RIGHT LEFT CENTER (2), THEN ...
...the rear sparkplugs is to remove the upper intake plenum. Do yourself a favor and replace the plug wires while it's apart, and stuff paper towels in the intake ports in case you drop
2005 dodge caravan 3.3 intake manifold torque specs Here's a Autozone repair guide link on your manifold torque specs. Repair Guides Engine Mechanical Components Intake Manifold AutoZone com
dodge caravan 2009 4L intake plenum torque what is the plenum torque Tighten bolts gradually starting in the center working outward until a torque of 12 Nm (105 in. lbs.) is obtained.
Usually answered in minutes!
2,271 Questions
1,496 Questions
1,337 Questions
1,299 Questions
1,150 Questions