Questions & Answers for: Chevrolet Corvette intake plenum torque

Question about 1989 Corvette

1 Answer

falls on it's face when throttled ,but runs good when rpm's are up.rough idle checked forvacume leaks changed iac valve ,egr,cap and rotor,adjust throttle positioning sensor with butterfly Slimsoul, a

Ad

...torque sequence for intake manifolds...example given in link. The balancer should be torqued also...85 - 90 Ft-lbs if I remember correctly. The balancer should be all the way back when completely ...

Ad

...intake plenum just about between the #4, #, #5 and #6 intake runners . It is real difficult to get to. You have to remove all the upper intake runners and if you do be sure get new gaskets as the old ...

...intake plenum) If you can find someone who has a fuel pressure gauge and run the car with the gage attached. I you can reset the timing 2 to 4 degrees less and see if that helps. Check the wiring to ...

getting into the car leaking from windscreen,door rubbers,blocked air intake plenum,door skin sheet unstuck,floor grommet fell out etc......use a high pressure hose with someone inside the car,easiest

intake plenum and then you can get to the ignition coil pack which sits underneath the plenum chamber. Don't forget to mark each cylinder lead and on the coil pack before you pull all the leads off...

torque but sacrifice even more top end RPM'S so, why would you want to do that? If you are building an engine, my opinion is that you would be better served getting yourself a really good set of heads

Question about 1988 Corvette

1 Answer

...intake, runners to plenum , camshaft retainer dogbone holder, timing gear to cam, valve covers ect. go to a auto supply shop and for a few dollarsthey can copy all the specs and sequences you need, ...

Question about 1988 Corvette

2 Answers

torque specs 1991 corvette fuel rail FUEL RAIL TO INTAKE BOLTS TORQUE IS 15 - 22 FT LBS. Where on the net can I get ALL the engine torque specs for a 1991 Corvette???

torque converter lock up problems with 350c transmission torque converter will not lock up, electrical part is working, solenoid getting power if the transmission control module checks out and ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Manuals & User Guides

Loading...