Questions & Answers for: Toyota MR2 intake manifold

...intake manifold vacuum leaks, do this by spraying carburetor cleaner around all the intake gaskets, if there is a leak you will hear the tone of the engine change, another thing is the throttle ...

intake manifold vacuum line Where does the two vacuum line from the intake manifold go (routing)? THIS IS FOR TURBO ENGINE NON TURBO ENGINE

intake manifold vacuum line part2 Vacuum line connection at the rear right side of the intake manifold has been cut and don't know where it connects to. If someone can please send me a diagram of some

...for Vacuum Leaks at Intake manifold, Work your way OUT from there to the Various Vacuum LINES . Check FUEL DELIVERY Such as PRESSURE< FUEL FILTER, Fuel pressure REGULATOR All this Needs ...

can you tell me the situation of the intake air sensor on the mr2 turbo please its in the air intake pipe between the air filter and the manifold

intake/carb cleaner into all the little holes as these fill up with oil vapour & eventually starve the engine of oxygen. then spray plenty into the air manifold as this also collects plenty of oil

intake manifold of the MR2 with an adjustable wrench and pull up on the thermostat housing to remove it from the intake. The housing is still connected to the hose. Lift the thermostat housing and the

the engine.  Without removing it (after removing your alternator and setting it on the back bracing out of the way) you can't get the alternator past the intake manifold or alternator bracket

...oxygen sensor is located in your air intake manifold .disconect your air intake pipe and check inside or laternatively (from outside ) see where and elctrical cable is connected on your air intake ...