Questions & Answers for: Chevrolet Astro intake manifold

...system, the injector is in the assembly on top of the engine on the intake manifold. If it has multi-point injection, it should have multiple injectors connected to the fuel rails on the

...intake manifold upper = step 1 = 44 in. lbs. step 2 = 88 in. lbs. intake manifold lower = step 1 = 27 in. lbs. step 2 = 106 in. lbs. step 3 = 133 in. lbs. ** (tighten bolts in sequence) thanks for ...

...intake manifold gasket and put everything back together again. The engine starts and appears to be running well now. The problem is when driving the vehicle, the transmission now shifts too early to ...

...intake manifold (so i can connect the small hose on the T fitting) anyone wanna shed some light on my situation? Connection is on the intake manifold on the drivers side about halfway back.Look for ...

how to change the coil on a 96 astro van remove the engine dog box from inside the van and the coil should be bolted to a bracket on the intake manifold

...intake manifold with a 4.3 litre moter Ha, you tried to fool me with the bit about a 3.5 L motor--I could find that one...here is the complete procedure from AutoZone.com: InstallationTo install: ...

...intake manifold located above the spark plugs but on the top side of the intake, they each have an electrical connector that plugs into them at the top, some removal of other parts may be neccessary, ...

pressur regulator on a1997 astro For the fuel? On the fuel rail on multi fuel injection set up! It is a steel bodyed diaphram with a vavummn hose connected in the center,leading to the intake manifold

...intake manifold: This procedure is for the CSFI system as the CMFI system uses an integral fuel pressure regulator. The CSFI uses a replacable unit mounted on the CSFI assembly. REMOVAL & ...

...Intake manifold gasket (might not have been done right), Head gasket(s), cracked cylinder head, or, cracked engine block. Check the oil. If it looks like chocolate milk it means the coolant and oil ...