Questions & Answers for: intake air temp sensor located

location of ''intake air temperature sensor''for 2004 rx330 lexus? 2004 RX330 LEXUS the intake air temp is also the air flow meter located in the tube after the air filter.

Ad

Question about 2005 Avalanche

2 Answers

intake air temperature sensor. can you help me out on exactly locating the sensors in each vehicle so i can hook these up? sometimes the air temp sensor is in the mass air too. Where is the Intake Air

Ad

...by a loose gas cap or fouled or failed air fuel O2 sensor. Check your gas cap is fully ratcheted, Drive a day or two. If lights don't clear you will need a code reader attached to the car to

...intake air temp cicuit ware is that on my car The Intake Air Temperature sensor sends a reading to the main engine computer as to what temp the incoming air going into the engine is, for maximum ...

Question about 2004 ES 330

1 Answer

...2004 ES 330? Also, is it fairly easy to replace? The shop wants $150 to do it, but that seems a bit high. I know it could be in a bad spot, but on all my other vehicles, I've always done it myself in ...

...air filter located on 2004 ES 330 Lexus? The engine air filter is inside a plastic covering just to the northwest of the battery. On the right side of the covering are 2 bolts on the front and back ...

Question about 2004 ES 330

1 Answer

I need to find out which oxygen sensor location is bank 2 sensor 2. Is that upstream or downstream after the catalytic converter? BANK 2 IS THE REAR OR RIGHT SIDE SENSOR TO IS BEHIND THE CONVERTER ...

...Code 113 is for a problem with the intake air temp sensor circuit. The sensor and circuit would need to be checked with a scanner. The sensor is in the intake hose on the passenger side of the

Question about 2004 ES 330

2 Answers

...intake air temp sensor is located at the intake, on the same large hose as your air filter. After the filter. Its measuring the air temp of air going in to your engine. Either in the intake manifold ...

2004 Lexus es330 intake manifold torque sequence.need to reinstall intake manifold after replacing the knock sensors. Need torque in ft. lbs. and bolt sequence. Thank you! Fix your car right away, by ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

Top Cars & Trucks Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

john h

Level 3 Expert

29494 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

7339 Answers

Are you a Cars & Trucks Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...