Questions & Answers for: Ford Windstar intake

Ad

Changed all the Intake gaskets now I have a coolent leak I have a 1999 Windstar with a 3.8 and was getting coads of p0303 p0305 and p0306. I had been told that it could be the intake gaskets so I ...

Ad

Question about 2000 Windstar

1 Answer

intake torque specs what are the torque specs for a 2000 ford windstar 3.0 liter intake, lower, upper and insulator bolts Upper intake Stage 1: Tighten to 20 Nm (14 lb-ft). Stage 2: Tighten to 25 Nm ...

Ad

...Number 2 Could be spark plug, wire or coil P0171 & P0174 Running Lean Vaccum leak Possible intake leak or PCV system leak. There are a couple of things this could be. First, check to see if ...

Question about 2001 Windstar

1 Answer

...the engine . just put a new cylinder head gasket ,had gasoline in tank for almost a year. It's an intake gasket. Another option, however rare is the air flow meter. But not likely. The white smoke ...

Question about 1998 Windstar

1 Answer

...problem? Codes p1537 and p 1538 are codes for a faulty IMRC valve. They are located on the lower intake manifold. Intake Manifold Runner Control (IMRC), Vacuum ControlRemove E-clip retaining

Question about 1999 Windstar

1 Answer

...3.8 liter engine. Want to access & clean EGR ports. Previous solution posts state to remove the intake manifold to access & clean. Do both the intake manifold and intake manifold spacer have ...

Question about 1998 Windstar

1 Answer

Could you show me a picture of where the intake manifold runner control is located? so that I know what I am looking for. they will be on the passenger side of the engine mounted to the lower intake ...

Question about 1998 Windstar

1 Answer

Intake manifold runner stuck open Need to be more (way more) specific. An intake man. is a one piece, aluminum device, with "runners" going into the head where your intake valves are operating open ...

98 ford windstar intake manifold torque specs Intake torque specs ' FordForumsOnline.com www.fordforumsonline.com > Ford Tech Forums > Engine & Drivetrain May 7, 2010 - 2 posts - ?2 authors ISO ...

what are the torque specs for intake manifold on a 1998 ford windstar what are the torque specs for the head and intake as well as www.justanswer.com > Ford ... as well as - 47. Find the answer to ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

1998 Ford Windstar
1998 Ford Windstar

1,797 Questions

2001 Ford Windstar
2001 Ford Windstar

1,796 Questions

2000 Ford Windstar
2000 Ford Windstar

1,464 Questions

1999 Ford Windstar
1999 Ford Windstar

1,185 Questions

2003 Ford Windstar
2003 Ford Windstar

996 Questions

Manuals & User Guides

Loading...