Questions & Answers for: Chevrolet TrailBlazer intake

Ad

Question about 2004 TrailBlazer

1 Answer

...it is in most cases the idle speed control air-bypass valve and or throttle valve and upper intake, these area's get full of gunk and combustion residue over the miles and cause idle issues ...

Ad

...it is in most cases the idle speed control air-bypass valve and or throttle valve and upper intake, these area's get full of gunk and combustion residue over the miles and cause idle issues ...

Ad

...need to know where to find thermostat on my 2001 chevy venture wb van with sideways v6 under the intake plenum, which will have to be removed before you can access the thermostat. I suggest having ...

Question about 2002 TrailBlazer

1 Answer

iv got oil in my air intake and dont have a pcv. Your intake gasket has failed!

How much should it cost to fix an intake valve on a 2002 chevy trailblazer LT, I was told it is a 24 hour job, so it is expensive is this true? I went to have the oil changed and was told I needed an ...

Question about 2002 TrailBlazer

1 Answer

what is the torque specs on intake 4.3 l v6 vortec To install: Clean all gasket surfaces completely. Install the intake manifold gaskets with the port blocking plates facing the rear of the engine. ...

how to remove intake on 2002 Chevrolet trailblazer 4.2 Do I have to remove the intake bolts to remove intake 4.2 Chevrolet no...just use a torch and blow the heads off.

Question about 2005 TrailBlazer

1 Answer

throttle body cleaning Tbi cleaning alone won't fix it. The entire intake (big black plastic intake manifold) needs to be removed and cleaned. Also clean any soot on the head intake runners. And ...

What can cause the car not to start after changing the valve cover and intake gaskets? nothing Changing the intake gasket requires removal of distributor I believe. Did you get it back in the exact ...

...used a different brand 02 sensor? Other problems could be low fuel pressure, faulty injectors or an intake leak. Check your intake bolts, our intake is plastic and the bolts DO come loose often. ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Manuals & User Guides

Loading...