Questions & Answers for: Pontiac intake

how do I change an intake exaust manafold intake and exaust manifold are completely different issues...do you mean that you need to replace gasket for intake system,,,as this is very common on GM ...

Ad

Question about 1999 Grand Am GT

3 Answers

1999 Pontiac Grand Am with "lower intake leak"...What does this mean specifically? Would this mean the intake for the radiator, gasket, or valve? Usually intake has to do with the induction system, as

Ad

looking for torque specs and sequence of both intake manifold and plastic plenum on 98 pontiac bonneville 3.8 non turbo Lower intake bolts 11 ft. lbs start in the center of the intake and work your ...

what are the torque measurements for the rocker arms and intake manafold? The torque specification is a 2-step process; tighten the vertical lower intake manifold bolts (the four middle ones) to 7 Nm

need to replace intake manifold how do you do this Bonneville, LeSabre, Park Avenue 2000-2005 Intake Manifold - Removal & Installation 3.8L Engine VIN 1 Engine Before servicing the vehicle, refer ...

Question about 1997 Grand Prix

2 Answers

need to replace the intake manifold 3.8L Engine (most common)Upper Intake ManifoldTo Remove: Drain the cooling system. Remove or disconnect the following: Negative battery cable. Fuel injector sight ...

...a 3.4L V6 engine and I have a small water leak around the alumium pipe that comes out of top of the intake on the front of the motor and runs across the top of the intake. I have had the gasket on ...

lossing antifreeze but no puddles we think its the antifreeze intake gasget? if no puddles or no keaks you can see, then its probably your head gaskets, or the intake gaskets leaking. look all around ...

Question about 1996 Grand Am

1 Answer

I have a 96 pontiac grand am the push rods got mixed up when i replace the intake gasket no i bought new rods I dont know the order that they go in stand all rods up on a table top, there should be 6 ...

Question about 1997 Grand Prix

1 Answer

intake noise it is not a valve sound, it seems to come from intake maifold. when turning off motor and after is stops it will sound like a pressure release from intake has it always done it? do you ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

Top Pontiac Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6988 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Are you a Pontiac Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...