Questions & Answers for: Oldsmobile intake

My olds does not have a MAF semsor in the intake tube. Went to bone yard and others didn't have them. Area all 95 Cutlass Supremes suppose to have one? Its actually just after the intake tube on ...

when you turn the key on excessive fuel flows into the air intake. its a 1989 6 cylinder 3.1 fuel injected You could have either an injector that is stuck open or a fuel pressure regulator that has ...

...and how to change the starter on my 1999 oldsmoble aurora v-8 The starter is located beneath the intake manifold, disconnect the ground cable at your battery, remove the cover covering the intake ...

i need torque specs got ptatnum anmd intake for 1995 olds 88 with 3.8 v6 Lower Intake Manifold 15 Nm (11 ft. lbs ######################################################## Upper Intake Manifold 10 Nm ...

How to change airfilter in 2003 oldmobil shiloutte premier van. Loosen the 2 air cleaner intake duct clamps from the Mas Airflow sensor and the throttle body. Disconect Intake Air Temperature sensor ...

Can you tell me torque requirement for intake manifold bolts on a 1999 Alero V6? upper intake bolts torque is 18 ft lbs - lower intake bolts torque is 115 inch lbs.

...six fill with coolant. what else will cause this other than a busted head? if this has a plastic intake these have a problem with the intakes warping allowing coolant into the combustion ...

lower intake gasket no heat For no heat issue,click the link below :-----http://technoanswers.blogspot.in/2012/02/no-heat-on-oldsmobile-silhouette.html --------Its caused by leak intake 

head on my 98 oldsmobile achieva with the 3100, the order i found online was for cylinders 1-3-5 1- intake/exhaust 3- exhaust/intake 5- exhaust intake i installed them like that and i have way to much

...diagram on how to change the starter on a 97 olds aurora The starter is located beneath the intake manifold,disconnect the ground cable at your battery,remove the cover covering the intake ...