Questions & Answers for: GMC intake

need to know the tork on rocker arm and intake for 2000 sonoma 4. need to know the tork rockerarmes and intake for 2000 sonoma 4.3 gortex 2 wheel drv v 6 it drop a leftter trying to find out if ...

...it is in most cases the idle speed control air-bypass valve and or throttle valve and upper intake, these area's get full of gunk and combustion residue over the miles and cause idle issues ...

intake manfold leaking antfreez intake manfold leaking antifreeze Is it leaking between wear the head and intake mate together? If so you can try retorqing the bolts and see if it stops other wise you

...it is in most cases the idle speed control air-bypass valve and or throttle valve and upper intake, these area's get full of gunk and combustion residue over the miles and cause idle issues ...

hot do you take off a 98 GMC 5.7 vortec intake Note, removing the upper intake manifold is not necessary when removing lower intake manifold, they are removed as an assembly. Disconnect negative ...

I replace the intake gasket of a 96' Jimmy 4.6 now it wont start I was thinking if it could be out of timing you could have intake leak.also intake leak at injector o rings or seals leak.when ...

...computer idle learning, do the fllowing and drive it a few days it will clear up. Get a can of intake cleaner from any local parts store, not carb spray, intake cleaner, it is made by a company ...

antifreeze leaks from intake ,need to know how to remove upper intake , fuel injectors are my bigest problem ,need to know how to remove them and proper tourque for bolts? I just completed this task. ...

...milk which tells me I have bad head gaskets. I was told by a mechanic that it could just be the intake manifold and not the head gasket. Is this possible and how do I find out if it's just one or ...