Questions & Answers for: installing danco faucet stems

Question about American Standard Plumbing

2 Answers

...Danco 11k-3h/c replacement stems after matching old with new at the hardware store. They went in fine, but the valves fail to seat either off or on and and water runs continously. Some times the seat ...

Ad

danco stem install. the spring goes in first then the rubber seat goes on top.put them together first on a small screwdriver,insert on hole push down on rubber into hole it should stay.replace stem in

Ad

...faucet cartridge for an american standard bathroom sink and the package said hot/cold but when I installed it on the cold side the handle turns the wrong way. How do I reverse the operation of the ...

...FAUCET ,AND SIT ON THE VALVE BODY(SEAT) #2 THE LITTLE BLACK WASHER SIT ON TOP OF YOUR SPRING #3 PUSH THE STEMS IN THE CORRECT SIDES HOT ON LEFT.CAUTION THERE IS USUALLY NOTCHES ON THE SIDES OF THE ...

I bought a Danco 3H-10H/C, Hot/Cold stem. The problem is, it seems to be setup for hot (clockwise closes the valve, counter clockwise closes it). Is it reversable? Or is it not really a hot/cold valve

Where does the spring and rubber piece go when installing a Danco 2S-2H/C stem? http://kitchen-bath.hometownhardware.com/Faucet_parts-ssd70982-p9-l1-t1-Sv-dirasc-PP10.html

Question about Faucet Cartridge

1 Answer

How do the 3 pieces go together for installation. The 3Z-6H/C?? thanks first off, put the spring in the faucet big end down. then put the black rubber boot seal in next and push it into place. Then ...

...danco 10472 4z-24h/c hot & cold faucet stem how to install Shut off water supply Open faucet Remove knob Unscrew old stem Use flashlight to inspect seat for damage and corrosion. Dress or replace ...

Question about Faucet Stem

1 Answer

Faucet still running Installed 3H-10H/C in Price Pfister faucet. Changed direction for cold water. To turn water completely off, faucet handle has to be in the middle, pushing it all the way back ...

...danco 9s-4h/c stem and there are instructions on how to assemble and install. how are the parts put together? Turn off the water supplying the faucet. Now open the faucet. Remove handle by taking off ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Top Plumbing Experts

john h

Level 3 Expert

29494 Answers

Brad Brown

Level 3 Expert

19187 Answers

ADMIN Andrew
ADMIN Andrew

Level 3 Expert

66963 Answers

Are you a Plumbing Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...