Questions & Answers for: how to install trim

Question about 1998 Intrigue

1 Answer

...trim panel Install new trim panel retainers to the rear door trim panel. Connect the electrical connectors. Align the door trim panel retainers to the door. Press the door trim panel at the retainer ...

Ad

first pull outward on the bottom of the door trim panel. Remove the rear door trim panel. Disconnect the window regulator control switch electrical connector. To install, reverse the removal procedure

Ad

...trim panels. Install the quarter trim bolster and the sliding door sill trim panel. If equipped, install the 2nd row seat. Install the 1st row seat. Refill the cooling system. Connect the negative ...

Question about 1994 Cougar

1 Answer

...trim panel away from front door (20125) , and lift bottom hooks from front door. Disconnect window regulator jumper wire (14A630) . Remove front door trim panel. To install, reverse Removal

...trim panel. Install the inside door handle. Install the bolt. Install the inside door handle trim cover. Install the door trim panel screw in the courtesy lamp housing. Install the screw. Install the ...

...trim. Install the quarter trim bolster. Install the sliding door sill plate. Install the second rear seat, if equipped, and install the first rear seat. Reconnect the negative battery cable. Check ...

Question about 2000 Caravan

1 Answer

...trim. Install the quarter trim bolster. Install the sliding door sill plate. Install the second rear seat, if equipped, and install the first rear seat. Reconnect the negative battery cable. Check ...

Question about 2000 Caravan

1 Answer

...trim plate upward into position. Install the screws attaching the accessory trim plate to the dash. Push the mounting clips into place and roll the top of the cluster trim plate upward into position. ...

...Install trim panel into inner belt molding at top of door. Install clips to attach door trim to door frame around perimeter of panel. If equipped, install screw to attach door trim to door panel ...

...the door handle trim bezel (6). 1. Install the mirror assembly (1). 2. Install the three nuts (2) and tighten to 7 Nm (65 in. lbs.). 3. Connect the electrical connector (3). 4. Install the trim ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

Top Cars & Trucks Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

john h

Level 3 Expert

29494 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

7339 Answers

Are you a Cars & Trucks Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...