Questions & Answers for: install timing chain

...install new timing chain on GA 1.6L engine I removed the old chain by cutting, how will i install the new one without disassembling the engine? timing chain marks. 1.6 nissan To get the full ...

Ad

Question about 2000 Durango

2 Answers

...Install timing chain cover (Refer to 9 - ENGINE/VALVE TIMING/TIMING BELT / CHAIN COVER(S) - INSTALLATION) and crankshaft damper (Refer to 9 - ENGINE/ENGINE BLOCK/VIBRATION DAMPER - INSTALLATION). ...

Ad

Question about 2000 S-10

1 Answer

...Install timing chain and timing chain tensioner (do not tighten tension bolts). Align the crankshaft and camshaft timing marks with the tab on the timing chain tensioner. Tighten the timing chain ...

...install the timing chain sprocket to the crankshaft. The teeth of the "A" bank and the "B" bank timing chain sprockets on the crankshaft must be out of phase with each other. If they are in phase ...

Question about 2001 XJ8

1 Answer

install the timing chain tensioner and bolts. Tighten bolts to 18 ft-lbs (25 Nm). NOTE: Lower half of timing chain must be above the tensioner arm dowel. Crankshaft sprocket timing mark Position lower

...Install timing chain on crankshaft sprocket. Set timing chain by aligning its mating mark with that on the crankshaft sprocket. Make sure sprocket's mating mark faces engine front. Install camshaft ...

Question about 1993 Sonoma Club

1 Answer

...Install the timing sprocket and the pinion gear (groove-side toward the front cover). Align the key groove with crankshaft key, then drive it into position using installation tool No. J-26587 or ...

...Install the timing belt in the following order: Crankshaft sprocket Idler pulley Left bank exhaust camshaft sprocket Left bank intake camshaft sprocket Water pump pulley Right bank intake camshaft ...

...Install timing chain tensioner adjuster No.1. Tighten the timing chain tensioner adjuster No. 1 bolt to 8 ft. lbs. (11 Nm). Pull out stopper from adjuster No.1. Apply engine oil to sliding surface of ...

Question about 2004 Aerio

1 Answer

Install timing chain cover and crankshaft damper. Install cylinder head covers. NOTE Before installing threaded plug in right cylinder head, the plug must be coated with sealant to prevent leaks. Coat

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

Top Cars & Trucks Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

john h

Level 3 Expert

29494 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

7339 Answers

Are you a Cars & Trucks Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...