...install it? you didnt say what engine 2.5 or 4.0 here is where the 4.0 sensor is. Under hood, center, upper engine area, mounted between intake manifold and valve cover unbolt twist to break loose ...
...intake gasket for leaks? While running, spray carb cleaner where the manifold and head join. If the idle changes substantially, you have a leak. I'd also check actual engine vacuum...you should have ...
...Install the intake and exhaust manifolds. Install the power steering pump bracket. Install the pushrods. Keep them in order! Install the rocker arms. Keep them in order! Thoroughly clean the mating ...
...Install the intake and exhaust manifolds. Install the power steering pump bracket. Install the pushrods. Keep them in order! Install the rocker arms. Keep them in order! Thoroughly clean the mating ...
...intake use a common gasket. When reinstalling the exhaust manifold, there are two guide pins, one front of the manifold and one in the rear. What usually happens is that the manifold sits ON these ...
...install the oxygen sensor or to connect it it is something looks like a ceramic pencil In order to remove the exhaust, you had to remove the intake as well. Chances are that you have a large vacuum ...
Usually answered in minutes!
635 Questions
545 Questions
532 Questions
469 Questions
339 Questions
