Questions & Answers for: Mercury how to install a intake manifold

intake manifold. The diameter of the lines and the intake manifold entry fitting are increased so that inadvertent disconnection of the lines after a vehicle is serviced will cause either an immediate

...intake manifold and exhaust gas recirculation valve. Install a new exhaust gas recirculation valve gasket. Position the EGR valve and install the bolts. Install the vacuum hose. Connect the EGR tube. ...

Install the intake manifold and 9 retaining bolts. Hand tighten the right-rear bolt (viewed from the front of the engine) before final tightening, then torque the bolts, in sequence, to 15-22 ft. lbs.

...intake manifold. To install: Install the EGR valve, along with a new gasket, on the upper intake manifold, then install and tighten the mounting bolts to 15-22 ft. lbs. (20-30 Nm). Connect the EGR ...

...Install a new sensor into the intake manifold. Tighten the 6-14 ft. lbs. (8-19 Nm). Attach the sensor wiring to the unit. Connect the negative battery cable. Fill the engine cooling system with a ...

...Install lower intake manifold as outlined. Install fuel injection supply manifold . Position valve cover and new valve cover gasket (6584) on cylinder head and install retaining bolts. Note location ...

install the upper intake manifold Hope helps. 6 total... the other 3 are located on the other side, in between the firewall and the engine... not an easy task to get at btw.... call the dealer and ask

...Install the Intake Manifold7Put a new gasket in place and install the lower intake manifold to the engine. Tighten the bolts in sequence as follows: first pass-35 inch pounds; second pass-78 inch ...

...Intake manifold shieldExhaust gas recirculation system module electrical connectorEGR system moduleEGR system module gasketEGR vacuum connectorEGR system module retaining bolt (2 required)EGR tube ...

...install intake manifold You should use a light duty Torque wrench and use a sequence that usually starts in a middle bolt location and alternates side to side and works from middle holes to extreme ...